Electrical Techniques
CIP Code: 46.0302
Overview
Take on a role in the electrical field where there is plenty or job security and room to grow.
Working in the electrical career field requires a combination of technical knowledge, problem solving skills, and physical dexterity. The Lambton College Electrical Techniques program prepares students for this field and prepares students to begin their journey into apprenticeship.
Working both in the classroom and in various lab and shop settings, students gain practical, hands-on experience along with strong theoretical training in electrical fundamentals. The basics of Programmable Logic Controllers (PLCs) are taught and electrical safety is also covered through theory and hands-on labs.
Students learn how electricity and electrical devices work, how to use various electrical tools, how to wire residential, commercial, and industrial circuits, how to interpret electrical codes, and how electronics and instrumentation devices are used in today’s high tech world.
Admission Requirements
O.S.S.D. or equivalent with:
- Grade 12 English C or U
- Grade 12 Mathematics C or U
- Grade 11 or 12 Physics C or U (recommended)
Grade 12 Mathematics Requirement
Grade 12 Mathematics for College Technology or any grade 12U mathematics is recommended; Grade 12 Foundations for College Mathematics (MAP4C) minimum final grade is 60%. If the program is highly competitive, students with Grade 12 Mathematics for College Technology or any Grade 12U mathematics will be given preference.
The admissions process is competitive and meeting the minimum academic requirements does not guarantee admission.
English Language Requirements
International applicants must demonstrate their knowledge and skills in English by submitting an English proficiency test. Please refer to our English Language Requirements webpage to determine which minimum scores are accepted.
Costs
- Term 1 $8,793.00
- Term 2 $7,984.17
Total Cost of Program
Please note: The estimated total includes tuition, mandatory student fees and health insurance to help you plan your education budget. Books (unless specifically noted), supplies, living expenses, and transportation costs are not included.
The tuition and fees are estimates and may change each academic year.
Additional Fees
-
Safety Shoes$250.00
-
Safety Glasses$20.00
-
Calculator$50.00
-
Tagout Lock$20.00
-
Tool Kit*$325.00
*Tool Kit Includes
- Linesmen Pliers - High leverage 9" side cutting pliers
- Side Cutters
- Needle Nose Pliers
- Tongue and Groove Pliers
- Slot Screwdriver
- Terminating Slot Screwdriver - 2.5 mm - 3 mm width
- Philips Screwdriver - #2
- Two Robertson Screwdrivers - sizes red and green
- Measuring Tape
- Wire Strippers
- Knife - no utility knives allowed
- Torpedo Level - short 9" or so
- Claw Hammer
- Safety Lock
Technology Requirements
In order to keep pace with the requirements of each and every course in your program, Lambton College requires that each student have access to a laptop while studying at our college.
Labs & Equipment
Electrical Shop
In this lab, students and apprentices learn how to safely and properly wire a wide variety of residential, commercial and industrial circuits according to the Canadian Electrical Code. Important skills are learned such as proper tool usage, safety principles such as lockout/tagout and wiring principles. Students learn about many types of circuits such as start/stop circuits, 3 way lighting and various receptacles as well as the operation of many devices such as relays, transformers, programmable logic controllers, variable frequency drives and motor control centres.
Motor Control Lab
Electrical fundamentals and electrical protection is taught in this lab. The basics of AC and DC electrical theory are proven using resistors, inductors, capacitors, shunts, data acquisition software, etc. Electrical generation, transmission, and load applications are studied. Advanced power electronic control is learned using current gate bipolar transistors, thyristors, rectifiers, filters etc.
Electronics Lab
This lab contains 15 stations where students are able to practice the safe and proper wiring of any number of electrical and electronic circuits. In this lab, students can learn about the theory of DC and AC circuits, basic wiring principles and the operation of many different devices such as power supplies, oscilloscopes, multimeters, resistors, potentiometers, capacitors, diodes, transistors, SCR's, digital devices, breadboards and many more.
Courses
Basic Electrical Installations I
The student will develop a general knowledge of the operation of common hand and power tools; install common switching devices, outlets and enclosures, GFCI and AFCI circuits, as well as three and four way lighting circuits. All installations well be performed to the CEC and the student will correctly terminate conductors and demonstrate the application of non-metallic sheathed and armoured cable. The student will demonstrate the skills required to install a complete residential consumer's service. They will properly bend and install both EMT and Rigid conduit.
Electrical Theory
This course covers the explanation of the fundamentals of electrical theory, from the molecular structure of matter to the laws that govern the calculation of current, voltage and power in DC circuits. Topics will include the relationships between voltage, current, resistance and power including Ohm's and Kirchhoff's laws. Calculations will be made on series, parallel and combination circuits and current flow and power consumption in 2 and 3 wire systems. Circuits will be wired safely and measurements taken using digital multi-meters. As well, the course will include an introduction to alternating current AC.
Safety & Electrical Code I
This course will focus on the Canadian Electrical Code regulations and the application of those regulations as they pertain to electrical installations in residential dwellings as well as commercial units. The student will learn to navigate through the Canadian Electrical Code and interpret sections including Wiring Methods, Conductors, Installation of Electrical Equipment and Protection and Control.
Workplace Communications
In this course, students write and speak in response to realistic workplace scenarios to build practical communication skills. They produce, revise, and edit written communication geared to the workplace and practice the oral communication and effective listening skills that will help them succeed in professional environments.
Fundamentals of Instrumentation I
This is an introductory course in process instrumentation and safety. Topics will include WHIMS and an introduction to industrial hazards, Job Safety Analysis, and Work Permits. Basic instrumentation and control loop concepts, instrument signalling, wiring, and calibration techniques will be studied. Pressure measurement will be covered in greater detail. The reading and interpretation of Process and Instrumentation Diagrams will be addressed. The laboratory component will expose the student to the correct use and operation of calibration devices, pressure sensors and measuring instruments.
Mathematics for Electrical Circuits
This course reviews and develops topics in basic computation, measurement, algebra, geometry, trigonometry, and linear functions, emphasizing their electrical applications.
Electrical Systems Applications
This course is designed to extend the student's knowledge and experience into the areas of single-phase AC as well as DC systems. Resistive-reactive DC and AC circuits, power factor correction, DC motors and generators and single phase AC transformers are studied. Emphasis throughout the course is on problem solving. These concepts are supported and reinforced in the laboratory portion of the course.
Electronic Devices & Applications
This course covers an explanation of the fundamentals of electronics from digital logic to the operation of basic semiconductor devices in DC and AC circuits. Topics will include logic gates, Boolean algebra, flip-flops, P-N junction diodes, LEDs, transistors, thyristors, opto-couplers and operational amplifiers. The student will apply his/her knowledge of these devices in practical circuits such as dimmers, variable frequency drives and programmable logic controllers.
Industrial Installation Practices
In this course the student will gain the ability to read, interpret, and create electrical schematics related to motor control. The installation and operation of common controls used in industry including Stop-Start, Jog, Forward/Reverse, and speed control via variable frequency drives will become part of the student's skill set. An introduction to the wiring and programming of Programmable Logic Controllers will complete the student's industrial control knowledge. In addition students will gain the ability to interpret drawings and install conventional fire alarm system class A and class B circuits. Students will become familiar with different fire alarm devices along with their uses and operation.
Basic Programmable Logic Controllers
Upon successful completion, the apprentice will be able to describe the basic operation of a PLC including numbering systems, programming, and addressing requirements, as well as perform testing of PLC inputs and outputs. The student will also be able to demonstrate basic PLC programming including common relay instructions such as timers and counters to design programs to operate machines in a required manner using many of the internal functions of a PLC.
Code & Prints
Upon successful completion, the student will be able to navigate and apply sections of the Canadian Electrical Code (CEC) including determining code requirements and performing calcuations for a residential service, maximum circuit loading, and motor branch circuits. The student will also be able to interpret and use information provided from drawings, specifications and standards, as well as create drawings and schedules for residential electrical installation and maintenance.
General Education Elective
Lambton College reserves the right to alter information including admission requirements and to cancel a program or course at any time; to change the program curriculum as necessary to meet current competencies or changes in the job market; to change the pathways to third-party certification bodies; or to withdraw an offer of admission both prior to and after its acceptance by an applicant or student because of insufficient applications or registrations or over-acceptance of offers of admission. In the event Lambton College exercises such a right, Lambton College's sole liability will be the return of monies paid by the applicant or student to Lambton College.
Contact
Centre for Global Engagement
LAMBTON COLLEGE SARNIA
1457 London Road
Sarnia ON N7S 6K4
After Graduation
Employment Opportunities
Our graduates have the skills to work in a variety of residential construction settings including renovation projects. They will also have the required skills to work in a warehouse or wholesale business in the electrical field. Job titles include: general labourer, construction and maintenance electrician apprentice, industrial electrician apprentice, trade contractor assistant, electrical technician, network cabling, fire alarm technician, related mechanical trades, independent contractor, service technician and warehouse and wholesale sales.
Pathways to Apprenticeship & Diplomas
Students who complete this program and secure an apprenticeship may be exempt from the Basic Level of in-school training for the Construction and Maintenance Electrician apprenticeship program.
Students can also continue into the second year of the Electrical Power Distribution & Control Technician (PDCT) program, which shares a common first year with Electrical Techniques. To continue into PDCT, Electrical Techniques students must complete MTH-1904.
Post-Graduation Employment
International students who complete an eligible program at Lambton College may be able to apply for a Post-Graduation Work Permit (PGWP) . A PGWP allows eligible graduates to gain Canadian work experience after their studies.
Eligibility and the length of your work permit are determined by Immigration, Refugees and Citizenship Canada (IRCC).
Looking for Support After Graduation?
Your connection with Lambton College continues after graduation. International alumni can access information, resources, and guidance to help navigate employment opportunities and life in Canada after completing their studies.
More Information
Student Responsibilities
- Course and program schedules may change for each intake.
- Bring a laptop with wireless internet capability.
- Bring official copies of your most recent police clearance, driver’s licence, and vaccination record from your home country, if available.
Empowering Women to Lead in Tech & Trades
Our Women in Technology & Trades (WiTT) is a vibrant community dedicated to empowering women to thrive in tech and trades. Through mentorship, industry connections, and skill-building programs, WiTT breaks down barriers and fosters an inclusive environment where women can confidently pursue their passions and careers.
Together, we’re shaping a diverse and dynamic future.
Learn more about WiTT
Technology Requirements
Internet Speed Requirements
For the best online learning experience, we recommend an internet connection with at least 40 Mbps download speed and 10 Mbps upload speed. This will help you attend online classes, join video calls and access online learning tools.
Internet service varies by location, so you will need to choose a provider that is available in your area.
Laptop Requirements
You will need a laptop to access online course materials, software and other learning tools. Your laptop should meet these minimum requirements:
- Intel i5 8th Gen Processor or equivalent
- 8GB of RAM
- 100 GB HDD or more
- Webcam and microphone
- Wi-Fi capable (802.11n/ac 5GHz)
- Windows 11 operating system
Mobile Device
You will also need a smartphone to:
- Access your digital student ID
- Use campus applications and services
Software
Some courses require specific software. Lambton College provides access to Microsoft 365 and other software needed for your studies. Much of your course software is available online and can be accessed on or off campus.
Immigration Regulations & Changes
Immigration regulations are set by the Government of Canada and may change at any time. Students are responsible for understanding and following current immigration requirements while studying and living in Canada.
Lambton College staff cannot provide immigration advice. For current requirements or questions, visit the Immigration, Refugees and Citizenship Canada (IRCC) website or call 1-888-242-2100.